Minimum length-scale constraints for parameterized implicit function based topology optimization

Open access via Springer Compact Agreement The author would like to thank the Numerical Analysis Group at the Rutherford Appleton Laboratory for their FORTRAN HSL packages (HSL, a collection of Fortran codes for large-scale scientific computation. See http://www.hsl.rl.ac.uk/). The author also would like to acknowledge the support of the Maxwell compute cluster funded by the University of Aberdeen. Finally, the author thanks the anonymous reviewers for their helpful comments and suggestions that improved this paper.Peer reviewedPublisher PD

Introducing the sequential linear programming level-set method for topology optimization

The authors would like to thank Numerical Analysis Group at the Rutherford Appleton Laboratory for their FORTRAN HSL packages (HSL, a collection of Fortran codes for large-scale scientific computation. See http://www.hsl.rl.ac.uk/). Dr H Alicia Kim acknowledges the support from Engineering and Physical Sciences Research Council, grant number EP/M002322/1Peer reviewedPublisher PD

Towards Zeptosecond-Scale Pulses from X-Ray Free-Electron Lasers

The short wavelength and high peak power of the present generation of free-electron lasers (FELs) opens the possibility of ultra-short pulses even surpassing the present (tens to hundreds of attoseconds) capabilities of other light sources - but only if x-ray FELs can be made to generate pulses consisting of just a few optical cycles. For hard x-ray operation (~0.1nm), this corresponds to durations of approximately a single attosecond, and below into the zeptosecond scale. This talk will describe a novel method to generate trains of few-cycle pulses, at GW peak powers, from existing x-ray FEL facilities by using a relatively short 'afterburner'. Such pulses would enhance research opportunity in atomic dynamics and push capability towards the investigation of electronic-nuclear and nuclear dynamics. The corresponding multi-colour spectral output, with a bandwidth envelope increased by up to two orders of magnitudes over SASE, also has potential applications.Comment: Submitted to 35th International Free Electron Laser Conference, New York, 201

On the co-rotational method for geometrically nonlinear topology optimization

Acknowledgements The author would like to thank the Numerical Analysis Group at the Rutherford Appleton Laboratory for their FORTRAN HSL packages (HSL, a collection of Fortran codes for large-scale scientific computation. See http://www.hsl.rl.ac.uk/).Peer reviewedPublisher PD

Multi-objective robust topology optimization with dynamic weighting

A common robust topology optimization is formulated as a weighted sum of expected and variance of the objective functions for the given uncertainties. This has recently been applied to topology optimization with uncertainties in loading, [1]. Figure 1(a) shows the Pareto front of solutions found using uniformly distributed weightings. This front suffers from crowding for weight values 0.625. In the general case, the two goals of multi-objective optimization are; to find the most diverse set of Pareto optimal solutions, and, to discover solutions as close as possible to the true Pareto front. This paper presents schemes to achieve both these goals

Design parameterization for topology optimization by intersection of an implicit function

The author would like to thank Numerical Analysis Group at the Rutherford Appleton Laboratory for their FORTRAN HSL packages (HSL, a collection of Fortran codes for large-scale scientific computation. See http://www.hsl.rl.ac.uk/).Peer reviewedPostprin

Advanced composite aileron for L-1011 transport aircraft: Design and analysis

Detail design of the composite aileron has been completed. The aileron design is a multi-rib configuration with single piece upper and lower covers mechanically fastened to the substructure. Covers, front, spar and ribs are fabricated with graphite/epoxy tape or fabric composite material. The design has a weight savings of 23 percent compared to the aluminum aileron. The composite aileron has 50 percent fewer fasteners and parts than the metal aileron and is predicted to be cost competitive. Structural integrity of the composite aileron was verified by structural analysis and an extensive test program. Static, failsafe, and vibration analyses have been conducted on the composite aileron using finite element models and specialized computer programs for composite material laminates. The fundamental behavior of the composite materials used in the aileron was determined by coupon tests for a variety of environmental conditions. Critical details of the design were interrogated by static and fatigue tests on full-scale subcomponents and subassemblies of the aileron

A wide bandwidth free-electron laser with mode locking using current modulation

A new scheme for mode locking a free-electron laser (FEL) amplifier is proposed based on electron beam current modulation. It is found that certain properties of the original concept (Thompson and McNeil 2008 Phys. Rev. Lett. 100 203901), based on the energy modulation of electrons, are improved, including the spectral brightness of the source and the purity of the series of short pulses. Numerical comparisons are made between the new and old schemes and between a mode-locked FEL and a self-amplified spontaneous emission FEL. Illustrative examples using a hypothetical mode-locked FEL amplifier are provided. The ability to generate intense coherent radiation with a large bandwidth is demonstrated